How to quickly make coffee metal table legs

You can make elegant, delicate, and sculptural masterpieces of metal table-leg furniture. Moreover, the metal table legs are easy to install, and almost any flat surface can be used as a desktop. For example, instant coffee metal table legs, the easiest way to make a table is to use hairpin legs to make a table! Next, the metal table legs manufacturer Gran Furniture Legs tells you the precautions for making coffee table legs.

What are the precautions for making coffee table legs?

1.Selection skills

Obviously, height is the key driving force for choosing table legs. For stools or coffee tables, you will use 16-inch high table legs. For terminal brackets, you will use 24 inches. The tables and tables are 28 inches. length.

2.Two-pole or three-pole?

For small tables, the appearance and effect of a two-pole 28-inch table is very good. For larger tables and thicker tops, you need to consider a three-bar table. Three shots stiffen the legs and eliminate any sway. The thick coat looks good too!

On the left are two table legs for small projects. As you can see from the right, larger tables and thicker countertops can be used with three legs.

3.Leg decoration

The table legs are made of steel, which will rust and stain clothes and carpets. Therefore, our countertop adopts practical powder coating surface treatment technology and even adopts advanced electroplating surface treatment technology. They are more resistant to corrosion than uncoated steel legs.

4.Top support

Conventional tables use peripheral aprons to connect the legs and form a base to prevent the top from sagging. But there is no apron on the table. On the contrary, the table legs are directly connected to the bottom of the tabletop. Here, you can design your own desktop. Since there is no apron, in order to keep the table top flat and support, you can consider adding wooden plywood inside the table leg.

5.Place the table legs under the tabletop

The table legs are easy to install. The legs are connected with the top plate fixing screws, at least "thick". If at least one of your pointed ends is thick, the screws we give you will not pierce the tabletop. The screw driven by the square head can be tightened bit by bit. If you don't have a square bit, we can sell it to you. The screw is self-tapping, so if you use a power drive, you do not need to drill pre-drilled positioning. If using a screwdriver, first drill a pilot hole. If the top surface is no more than one inch thick, the screws need to be shortened.

6.Mounting legs

The feet are easy to install and remove. Turn the table over to complete this action. Place one leg at a time away from the corner of the table, about 2 inches from the edge of the table. Temporarily fix it with two screws. Similarly, there are three other legs. Turn the table over and make an assessment. You can adjust the position of the leg according to your own aesthetic judgment. After reaching the appropriate shape, use the remaining screws to fix the leg.

Finally, the desktop legs are a great way to express a strong style. They have many decorations to complement your decoration. They are easy to install, almost under any flat wooden surface. Adding a cleat system can strengthen the desktop.

The above are the precautions for making coffee metal table legs. I hope it will help you to some extent. If you don’t know anything, welcome to consult. We are a metal furniture leg supplier from China——Glan.

We provide the quotation information of wholesale metal table legs. Get more details now!

Images for metal furniture feet

People also ask

How to remove rust from metal table legs

How to protect your metal furniture and remove the rust, makes your furniture look clean?

Here are some tips on removing rust from the metal legs:


Post time: Mar-19-2021
  • facebook
  • linkedin
  • twitter
  • youtube

Send your message to us:

Write your message here and send it to us